Marca: Markvision 3
Modelo: 2117EW/S4
Fecha de Fabricación: NC
Número de Serie: E202104130060126
Lugar de Fabricación: Taiwan
Factor de Forma: SSD 2.5"
Conexión: SATA
Capacidad: 480
Estado del Disco: Problemas con la PCB
PCB Nº 100-N001122581-690
PCB Sticker: NC
MCU:
De Frente De Dorso Del PCB
De Dorso Del PCB
Del PCB
S.M.A.R.T & Informe Model : ESA3SMH2HTH2BT480GB Serial : E202104130060126 Firmware : S1205A0 Capacity : 480 GB (937 703 088) Password set............................ : No Device configuration overlay............ : Not supported Capacity................................ : With no restrictions S.M.A.R.T. drive status................. : Threshold exceeded -----+------------------------------+-------+------- ID | Attribute | State | Value -----+------------------------------+-------+------- 5 | Reallocated Sector Count | Raw | 1 196 | Reallocation Events Count | Ok | 0 197 | Current Pending Sector Count | Raw | 1 198 | Uncorrectable Sector Count | Ok | 0 -----+------------------------------+-------+------- S.M.A.R.T............................... : Contains drive malfunction flags Look ahead.............................. : Granted Write cache............................. : Granted Error recovery control.................. : Not supported Loader uploading **************************************** MPISP code name......................... : S1230A0 HYNV5_00; S1114A(N) Write "S1230A0 HYNV5_00; S1114A(N)"..... : Ok Calling executable code................. : Ok Seed table reading Completed Microcode reading (0)................... : Ok Firmware version (Internal)............. : S1205A0 HYNV5_00 SSD parameters reading.................. : Ok Write "S1205A0 HYNV5_00; S1114A(N)"..... : Ok Calling executable code................. : Ok Reset SSD controller.................... : Ok Write "Config Package".................. : Ok Write "S1205A0 HYNV5_00; P0812(D)"...... : Ok Calling executable code................. : Ok SSD status: SSD is in ready state................... : Yes Firmware mode........................... : DBG SSD error code.......................... : 0x00 (No errors) SSD is locked........................... : No SSD is in Safe Mode..................... : No Logical access is possible.............. : No Physical access is possible............. : Possibly **************************************** Microchips information uploading........ : Ok SSD parameters reading.................. : Ok System Info: Chips id................................ : 0xAD5E283300A0 Vendor.................................. : Hynix Type.................................... : 3dv5-96L TLC 16k Chip capacity........................... : 68 688 Mb Channels................................ : 4 Chips (Total)........................... : 0x08 Planes per chip......................... : 4 LUNs per chip........................... : 1 Blocks per chip......................... : 0x03BA Pages per block......................... : 0x1200 Page size............................... : 0x4000 Max retry level......................... : 0x00
Cargado Por:
